oke:
| oke aha | àgwà uru |
| Rohs enwetara asambodo? | ezute na |
| Aha ahia | XILINX (Xilinx) |
| Nweta koodu nnabata | compli |
| Koodu ECCN | 3A991.D |
| ugboro elekere kacha | 667 MHz |
| JESD-30 koodu | S-PBGA-B484 |
| Koodu JESD-609 | e1 |
| Ọkwa mmetụta iru mmiri | 3 |
| ọnụ ọgụgụ nke ndenye | 338 |
| Ọnụọgụ nke nkeji ezi uche | 147443 |
| Oge mmepụta | 338 |
| Ọnụọgụ ọnụ | 484 |
| Ihe ngwugwu ahụ | Plastic/EPOXY |
| koodu ngwugwu | FBGA |
| Tinye koodu dakọtara | BGA484,22X22,32 |
| Ụdị ngwugwu | SQUARE |
| Ụdị ngwugwu | GRID ARRAY, mpio mara mma |
| Okpomọkụ kachasị elu (Celsius) | 260 |
| ịnye ọkụ | 1.2,1.2/3.3,2.5/3.3 V |
| Ụdị mgbagha nke mmemme | Ọdụ ụgbọ mmiri |
| Ọkwa asambodo | Ezughị oke |
| elu ugwu | EE |
| teknụzụ | CMOS |
| Elu njedebe | TIN SILVER ọla kọpa |
| Ụdị njedebe | Bọọlụ |
| Ngwugwu njedebe | 0,8 mm |
| Ebe njedebe | N'okpuru |
| Oge kacha elu na okpomoku ntughari kacha elu | 30 |
Nkọwa zuru oke:
Xilinx® 7 usoro FPGA nwere ezinaụlọ FPGA anọ na-eleba anya n'ọtụtụ usoro chọrọ, sitere na ọnụ ala dị ala, obere ụdị ihe,
ngwa nwere mmetụta dị oke ọnụ, ngwa dị elu na bandwidth njikọ njikọta dị elu, ikike mgbagha na ikike nhazi akara maka ihe kacha achọ
ngwa ọrụ dị elu.Usoro FPGA 7 gụnyere:
• Ezinụlọ Spartan®-7: Emebere ya maka ọnụ ala dị ala, ike dị ala na elu
arụmọrụ I/O.A na-enweta ya na ọnụ ala dị ala, obere ụdị-ihe kpatara ya
nkwakọ ngwaahịa maka akara ukwu PCB kacha nta.
• Ezinụlọ Artix®-7: Kachasị mma maka ngwa ike dị ala chọrọ usoro
transceivers na elu DSP na mgbagha mmepụta.Na-enye ndị kasị ala
ngụkọta ụgwọ ihe onwunwe na-eri maka nnukwu nbipụta, nke nwere oke ọnụ
ngwa.
• Ezinụlọ Kintex®-7: Emebere ya maka ịrụ ọrụ ọnụ ahịa kacha mma yana 2X
mmụba tụnyere ọgbọ gara aga, na-enyere klas ọhụrụ aka
nke FPGA.
• Ezinụlọ Virtex®-7: Emebere ya maka ịrụ ọrụ sistemụ kacha elu yana
ikike na nkwalite 2X na arụmọrụ sistemụ.Kachasị elu
ngwaọrụ ndị nwere ike na-akwado site na njikọta silicon stacked (SSI)
teknụzụ.
Ewubere ya na teknụzụ ọgbara ọhụrụ, arụmọrụ dị elu, ike dị ala (HPL), 28 nm, teknụzụ usoro ụzọ igwe dị elu (HKMG), usoro FPGA 7 na-enyere aka
mmụba na-enweghị atụ na arụmọrụ sistemụ yana 2.9 Tb / s nke bandwit I / O, ikike sel 2 nde mgbagha, yana 5.3 TMAC/s DSP, ebe ị na-eri 50% obere.
ike karịa ngwaọrụ ọgbọ gara aga iji nye usoro ọzọ nwere ike ime ka ASSP na ASIC.
Nchịkọta nke atụmatụ FPGA 7 Series
• Esemokwu FPGA dị elu dị elu dabere na ezigbo ntinye ntinye 6
Tebụl elu (LUT) teknụzụ nhazi dị ka ebe nchekwa ekesa.
• 36 Kb dual-port block RAM nwere ezi uche FIFO arụnyere maka data on-chip
nkwụnye ego.
• Teknụzụ SelectIO™ dị elu nwere nkwado maka DDR3
ihu ihu ruru 1,866 Mb/s.
• Njikọ ọsọ ọsọ ọsọ ọsọ yana transceivers multi-gigabit arụnyere n'ime ya
site na 600 Mb/s ruo max.ọnụego 6.6 Gb/s ruo 28.05 Gb/s, na-enye a
ọnọdụ ike dị ala pụrụ iche, nke kachasị maka mgbawa-na-mgbawa interfaces.
• Onye ọrụ configurable analọgụ interface (XADC), na-agụnye abụọ
12-bit 1MSPS analọgụ-na-dijitalụ ntụgharị nwere on-chip thermal na
ihe mmetụta ọkọnọ.
• Mpekere DSP nwere 25 x 18 multiplier, 48-bit accumulator, na pre-adder.
maka nzacha arụmọrụ dị elu, gụnyere symmetric kachasị mma
ọnụọgụgụ nzacha.
• Taịlị njikwa elekere siri ike (CMT), na-ejikọta oge akpọchiri
loop (PLL) na onye njikwa elekere agwakọta (MMCM) maka ihe dị elu
nkenke na obere jitter.
• Jiri MicroBlaze™ processor wepụta nhazi agbakwunyere ngwa ngwa.
• ngọngọ agbakwunyere maka PCI Express® (PCIe), ruo x8 Gen3
Atụmatụ njedebe na mgbọrọgwụ Port.
• Nhọrọ nhazi dị iche iche, gụnyere nkwado maka
Ncheta ngwa ahịa, 256-bit AES izo ya ezo na HMAC/SHA-256
nyocha, na nchọta SEU arụnyere na mgbazi.
• ọnụ ala dị ọnụ ala, eriri waya, flip-chip na-anwụ anwụ na mgbama mgbama dị elu.
ngwugwu mgbawa na-enye njem dị mfe n'etiti ndị ezinaụlọ na
otu ngwugwu.Ngwungwu niile dị na Pb n'efu ma họrọ
ngwugwu na nhọrọ Pb.
• Ezubere maka ịrụ ọrụ dị elu na ike dị ala na 28 nm,
HKMG, HPL usoro, 1.0V isi voltaji usoro teknụzụ na
0.9V isi voltaji nhọrọ maka ọbụna ala ike.
